Water will probably start to collect within your iPhone’s speaker grilles whether you have mistakenly dropped it in the shower or the pool, in the toilet or your dog’s water dish, or do any of the above. Your Phone Speaker is damaged.
Audio playback through the speakers becomes softer and muffled when exposed to water, and getting that water out is a difficult operation.
But there is a way to remove Water from the Phone Speaker. One can try the below method to remove Water from Speaker.
Since the end of 2016, all iPhone models have included water resistance. The iPhone XS and newer have IP68 certifications with a maximum depth of up to two, four, or six metres for up to 30 minutes, depending on the model.
The iPhone 7, 7 Plus, 8, 8 Plus, X, XR, and SE (second generation) are IP67-rated per IEC standard 60529.
However, Your Phone’s speaker might get affected if water remains there. Let’s talk about how to fix it quickly.
Some Precautions to keep in Mind
Consider the following advice while trying to dry the speaker on your phone:
- Avoid using a blow dryer to dry the speaker on your phone since this might irreparably harm the circuitry.
- Avoid placing anything inside the speaker or the phone.
- Never try to take apart the phone yourself.
- A heated phone might cause the battery to explode.
- While it is wet, avoid attempting to charge your phone.
- Avoid violently shaking or slamming your phone.
How to remove Water from Phone Speaker? 5 Fixes
There are a couple of techniques for getting water out of a phone speaker. It may be cleaned with a cloth, and then dried. An application that plays a sound at a particular volume is available. You may either take the phone to a repair shop or soak it in a dish of rice to absorb the moisture.
Remove the micro-SD card, SIM card, phone cases, and coverings if you can. Additionally, remove the battery if your phone has that feature.
If you’re lucky, your phone may have been switched off before any significant water damage occurred.
Your phone’s speaker may sound muted if you unintentionally poured liquid on it or dropped it in water. Fortunately, there are a few different ways to get rid of water. Let’s investigate how!
Clean your Phone Speaker with a Cloth or Paper
When water comes into touch with the speaker on your phone, you should wipe it clean immediately. Your phone and the speaker should be carefully cleaned with a dry, lint-free microfiber cloth until there is no sign of water remaining.
Before attempting to use the speaker, let it dry for at least 24 hours. Try the following step if it sounds muddled or less clear than you’re used to.
Put the Phone in a Bowl of Rice
Placing your phone in a bowl of rice for the night is one method for removing moisture from it. Even though there is no assurance with this approach, many individuals have found success with it, so it’s absolutely worth a go.
Use Third-Party Apps
There are downloaded applications that can assist you in getting rid of the water in your phone’s speaker grill whether you have an iPhone or an Android device. These applications emit sound waves powerful enough to force water out of the speaker.
You may use Water Eject and Speaker Cleaner on iPhones to make a noise that will force water out of your speaker. Speaker Cleaner is an excellent choice for Android smartphones.
One can use these App on the PlayStore (Android): Speaker cleaner – Remove water
For App Store (iOS): Speaker Cleaner – Water Remove
Remove Water By Gently Shaking the Phone
Shake the smartphone slightly to get water out of the charging ports, but don’t shake it vigorously because that might spread the liquid inside even more.
After that leave the phone for some time, any water that would be there would eventually dry out.
Go to Authentic Repair Center
Sending your phone to the manufacturer’s service facility for repair would be your final choice if none of the aforementioned remedies was successful.
If your phone is water-resistant and still covered by warranty, you may be able to get it fixed for free or at a reduced price.
Even though the product is advertised as being water-resistant, the majority of manufacturers do not cover water damage under warranty. Even though it will cost you more money, you should still be able to save the speaker.
Okay, so that was how you could dry the speaker on your phone.
Your phone should be cleaned off, placed in a dish of rice, and allowed to gently dry for up to 24 hours. Try to avoid using or attempting to charge your phone at the same time. In order to avoid further damage, it is also strongly advised that you avoid using an external heat source to dry it.
Finally, think about having the phone repaired at a licenced service facility.